by Marius Bogdan Lixandru
Myprevious guide for JDownloader 2involved the use of Task Scheduler. Today I’m offering a recommended and excellent alternative for installing the latest JDownloader 2version via Portainer. JDownloader 2 is a free, open-source download management tool with a huge community of developers that makes downloading as easy and fast as it should be. Users can start, stop or pause downloads, set bandwidth limitations, auto-extract archives and much more. It’s an easy-to-extend framework that can save hours of your valuable time every day. In this step by step guide I will show you how to install JDownloader 2 on your Synology NAS using Docker & Portainer.
💡Note:
This guide works perfectly with the latest JDownloader 2 v24.01.1release.
Please Support My work by Making a Donation.
InstallPortainer using my step by step guide. If you already have Portainer installed on your Synology NAS, skip this STEP. Attention: Make sure you have installed the latest Portainer version.
Go toFile Station and open the docker folder. Inside the docker folder, create one new folder and name it jdownloader2. Follow the instructions in the image below.
Note: Be careful to enter only lowercase, not uppercase letters.
Now create two new folders inside the jdownloader2 folder that you have previously created at STEP 3and name them config and output. Follow the instructions in the image below.
Note: Be careful to enter only lowercase, not uppercase letters.
Log into Portainer using your username and password. On the left sidebar in Portainer, click on Stacksthen+ Add stack. Follow the instructions in the image below.
In the Name field type in jdownloader2. Follow the instructions in the image below.
Note: Copy Paste the code below in the Portainer Stacks Web editor.
version: "3.9"services: jdownloader2: image: jlesage/jdownloader-2 container_name: JDownloader-2 hostname: jdownloader2 mem_limit: 8g cpu_shares: 2048 security_opt: - no-new-privileges:true - seccomp:unconfined ports: - 3129:3129 - 5800:5800 - 5900:5900 volumes: - /volume1/docker/jdownloader2/config:/config:rw - /volume1/docker/jdownloader2/output:/output:rw environment: TZ: Europe/Bucharest USER_ID: 1026 GROUP_ID: 100 DARK_MODE: 1 #Type in 0 instead of 1 if you want a light theme restart: on-failure:5
Note: Before you paste the code above in the Web editor area below, change the value for TZ.(Select your current Time Zone from this list.)
Note: Before you paste the code above in the Web editor area below, change the value numbers for USER_ID and GROUP_IDwith your own values. (Follow my step by step guide on how to do this.)1026 is my personal PUID value and100 is my personal PGID value. You have to type in your own values.
Scroll down on the page until you see a button namedDeploy the stack. Click on it. Follow the instructions in the image below. The installation process can take up to a few minutes. It will depend on your Internet speed connection.
If everything goes right, you will see the following message at the top right of your screen: “Success Stack successfully deployed“.
Go back toSTEP 1or you will deal with karma 🙂
The installation process can take up to a few seconds/minutes. It will depend on your Internet speed connection. Now open your browser andtype in http://Synology-ip-address:5800 Wait for the installation to be done. ⚠️Note: If you see a black static page after the installation is done, just refresh the page. Follow the instructions in the image below.
A new pop up window will open. Click OK to automatically set up a Dark Mode theme for your JDownloader 2 instance. Follow the instructions in the image below.
Click Install now. Follow the instructions in the image below.
Your JDownloader 2 dashboard at a glance!
Enjoy JDownloader 2!
If you encounter issues by using this container, make sure to check out the Common Docker issuesarticle.
Note: If you want to run the JDownloader 2 container over HTTPS, check How to Run Docker Containers Over HTTPS. In order to make JDownloader 2 work via HTTPS, it’s mandatory to activate WebSocket.
Note: Can I run Docker on my Synology NAS?See the supported models.
Note: How to Back Up Docker Containers on your Synology NAS.
Note: Find outhow to update the JDownloader 2 container with the latest image.
Note: How to Free Disk Space on Your NAS if You Run Docker.
Note: .
Note: How to Activate Email Notifications.
Note: How to Add Access Control Profile on Your NAS.
Note: How to Change Docker Containers Restart Policy.
Note: How to Use Docker Containers With VPN.
Note: Convert Docker Run Into Docker Compose.
Note: How to Clean Docker.
Note: How to Clean Docker Automatically.
Note: Best Practices When Using Docker and DDNS.
Note: Some Docker Containers Need WebSocket.
Note: Find out the Best NAS Models For Docker.
Note: Activate Gmail SMTP For Docker Containers.
This post was updated on Wednesday / March 6th, 2024 at 12:41 PM
